Framing exterior walls with 2 x 6

Framing the exterior walls with 2 x 6 studs instead of 2 x 4 can certainly contribute to the price of the house. In addition to the cost of lumber is also an increase in work, insulation, windows and door.

The advantages of using 2 x 6 exterior walls will be further structural strength to the construction and the ability to use thicker insulation in the walls.

One reason I can think of using 2 x 6 exterior wall mustinstall thicker insulation 2 x 4 insulated walls with R-13, approximately 4 cm and 2 x 6 will insulate with R-19, which is about 6 inches thick ..

Two more inches will be a 50% increase over the wall 2 x 4, 50% is a lot to do with something .. Imagine having a 50% increase in his annual salary this year. It is not something to complain about, it would be.

2 x 6 are also benefits when holesPlumbing pipes, electric cables or hydraulic channels often. and electricians drilling 2 x 4 walls with a little 'more like the structural strength of the house. Some hydraulic hoses, for example, 2 cm in diameter, the tip around a 3 1 / 2 inch 2 x 4, leaving only three quarters of an inch on each side, as the entire drilled exactly in the middle.

Drill a hole 2 cm to 2 x 6, there will be an inch and three quarters of eachpage. In other words, if you have two thumbs down 5-1 / 2 inches, the thickness of 2 x 6, 2 x 4 has a left on 2 x 6 frame. also 50% more lumber and structural strength of the house. Again, this may not seem like much, but it is.

If you are near a busy road or highway of life, you can create 2 x 6, use only the external walls separating your room from busy street. The thicker wall, the harder it is for healthythrough this journey.

The biggest problem with most home builders is the extra cost, and it came out right away their profits .. Most amateurs, especially the older ones, depends on every penny they can to survive in the long term this is a very difficult business to be.

If you build your house, make a contribution when you use 2 x 6, if you live in areas where temperatures are very cold or hot. One reason only frameexterior walls with 2 x 6 is the possibility of using more insulation, and would cut the cost of utilities if you are in a temperate climate, where energy bills are astronomical, it is not convenient because you have two purposes. x 6